4.In flash BIOS, the message Please do not remove AC Power Source displays.
C:\NDWG0\ndwg005a\ndwg005
C:\NDWG0\ndwg005a\flashit ndwg005.fd /b /fe /dc
Please do not remove the AC power!
C:\NDWG0\ndwg005a\
Plug in the AC power to continue.
5.Flash is complete when the message Flash programming complete displays.
WinFlash Utility
Perform the following steps to use the WinFlash Utility:
1.
2.Click OK to begin the update. WinFlash closes all applications and shuts down the system. NOTE: Place only one *.wph file with flash32.exe in the same folder when executing this procedure.
Chapter 2 | 33 |