Parameter | Description | Options |
|
|
|
Interrupt | Sets the IRQ of the Com operation. | IRQ3 |
| Help: Set the base I/O address for serial port A. | IRQ4 |
|
|
|
DMA Channel | Sets a DMA channel for the printer to operate in ECP | DMA1 |
| mode. This parameter is enabled only if operation | DMA3 |
| mode is set to ECP. |
|
| Help: Set the DMA channel for the parallel port. |
|
|
|
|
Parallel Port | Enables or disable the parallel port. | Disabled |
| The parallel port is a PnP device. Enabled/Disabled | Enabled |
| setting won’t affect the Windows Device Manager | Auto |
| setting of the parallel port. |
|
| Sets operation mode of the parallel port. |
|
| Only set the parallel post operation mode in BIOS |
|
| setup. If set to be ECP mode, the Windows will |
|
| assume the parallel port as the ECP port. |
|
| If operation mode is set to Base I/O address, sets the |
|
| base I/O address, of the parallel port. |
|
| If operation mode is set to interrupt, sets the interrupt |
|
| request of the parallel port. |
|
| If operation mode is set to ECP DMA Channel, sets |
|
| the direct memory access (DMA) channel for the |
|
| printer to operate in ECP mode. This parameter is |
|
| enabled only if operation mode is set to ECP. |
|
| Help: Set the mode for the parallel port using |
|
|
|
|
Mode | Sets speration mode of the parallel port. |
|
| Only set the parallel post operation mode in BIOS | EPP |
| Setup. If set to be ECP mode, the Windows will | ECP |
| assume the parallel port as the ECP port. |
|
| Help: Set the mode for the parallel port using |
|
|
|
|
Base I/O address | Sets the base I/O address of the parallel port. | 378, 278, or 3BC |
| Help: Set the base I/O address for the parallel port. |
|
|
|
|
Interrupt | Sets the interrupt request of the parallel port. | IRQ5 or IRQ7 |
| Help: Set the interrupt request for the parallel port. |
|
|
|
|
38 | TravelMate C110 |
