12:35
Through out the
Activity test, point the remote toward your devices.
Begin Test
12:35
Reconnect USB to
verify Activity.
Test again
Test the entire activity
The next screen lets you test the Good Night activity with your entire system. IMPORTANT: Make sure all your devices are off before you start. Also make sure your remote is pointed directly at your home theater. Then press Begin Test. The screen says “Sending” while the remote is sending the power commands.
Did it work?
The next screen asks if the activity
If it worked: Reconnect the remote to your PC (see the heading below).
If it didn’t work: Make sure your remote is pointed directly at your home entertainment devices and that there’s nothing obstructing path, then press Test again button. IMPORTANT: Make sure all your devices are off before you start. Test each device by pressing its
Try several times with the remote in different positions. If it still doesn’t work, go ahead and reconnect to PC to troubleshoot and correct the activity.
Reconnect the remote to your PC
Once you’ve reconnected the remote, press Continue on the
How do I know the remote’s connected?
Look for the green arrow icon in your PC’s status bar.
Activities
Activities | 23 |