Actiontec electronic GE344000-01 user manual Windows

Appendix B Configuring TCP/iP

18.Restart the computer. After the computer restarts, verify the settings. Click Start, Programs and Command Prompt. At the command prompt, enter:

ipconfig /all

Verify an IP address was received, then close the window.

Windows 2000

Windows 2000 installs with default TCP/IP configuration. If the computer is new with Windows 2000 installed, or Windows 2000 has just been installed on the com- puter, connect the computer to the Router. No further configuration is necessary.

If the Windows 2000 TCP/IP settings on the computer have been changed since installation, the TCP/IP settings must be configured. If this is the case, ensure the Windows 2000 installation disks or CD-ROM is available before beginning, since some driver information may need to be copied during the configuration process. If the installed Ethernet adapter was supplied with a driver diskette, it should be available as well.

☞Note: When installing any software, consult the user guide and help files supplied with the software for detailed information. Actiontec provides the following information as a guideline only.

To configure Windows 2000 TCP/IP settings:

1.Click Start, Settings and Control Panel.

2.When the “Control Panel” window appears, double-click Network and Dial- Up Connections.

57