Actiontec Wireless Cable/DSL Router User Manual
USB Connection
1.Start up the computer.
2.Connect the square plug of the purple cable to the port labeled “USB”on the back of the Router. Connect the rectangular plug of the blue cable to a USB port on the computer.
3.Plug the Router’s power supply into a electrical wall outlet, then plug the other end in the port labeled “Power” on the back of the Router. Next, follow the instructions in the “Loading the USB Software” section to finish connect- ing the Router with a USB cable.
USB
Reset
Cable/DS | L |
|
LAN
Power
Ethernet Cable | USB Cable | Power Cord |
(to Cable/DSL | (to Computer) | (to Power |
Modem) |
| Outlet) |
6
