9
Using the Configuration Utility
Once the Wireless Network Extender has been properly connected and installed
according to the Quick Start Guide, the user can further configure the Extender using
the Actiontec MegaPlug Wireless Configuration Utility. The Utility also provides
information about the network. After installing the CD in the computer’s CD-ROM
drive, the Utility starts up automatically and appears on the desktop. See the follow-
ing sections for more information about the Utility’s capabilities.
Across the top of the window are additional options: Locate Device, Setup
Wizard, IP Setting, Wireless Setting, Factory Default, Device Info, and
Management.

Locate Device

Clicking Locate Device causes the Utility to search for Wireless Network Extenders
available on the Homeline network. A list of available Extenders will appear in the
window, as shown in the figure above.
3