24
Front Panel Replacement
1. Discontinue electrical power to the dryer.
2. Remove bottom lint drawer assembly.
3. Remove the screws securing the front panel to the dryer.
4. Disconnect the two (2) door switch wires located behind the front panel.
5. Remove the front panel.
IMPORTANT: When pulling the front panel off, the door switch harness in the upper right hand
corner must be unplugged.
NOTE: The main door assembly can be removed to make the panel removal easier. Refer to Replace
Main Door Assembly directions.
6. Reinstall the new front panel by reversing Step #1 through Step #4.
7. Reestablish electrical power to the dryer.
Main Door Hinge Block Replacement
1. Discontinue electrical power to the dryer.
2. Follow procedure for removal of main door assembly for top hinge removal.
3. Remove the two screws from the bottom hinge block.
4. Reassemble by reversing removal procedure.
5. Reestablish electrical power to the dryer.