ADTRAN 610200094 manual Basic Operation, Removing the I35MB, Partitioning and Formatting

Adtron I35MB Operations Manual

Removing the I35MB

To remove the I35MB from the hard disk drive bay:

1.Make sure that you are properly grounded.

2.Power down the computer.

3.Remove the chassis casing.

4.Disconnect the 80-conductor cable and the computer power supply cable from the I35MB.

5.Unfasten the mounting screws and remove the I35MB from the disk drive bay.

„

Basic Operation

The I35MB operates as a storage subsystem that can be used as a boot device or as additional storage.

Partitioning and Formatting

To the operating system, the I35MB looks like a single disk drive. All RAID-1 functions occurring in the I35MB are transparent to the operating system. Use the operating system utilities to partition and/or format the I35MB hard disk drive.

Operating System Installation

The I35MB can be formatted like any standard hard disk drive – bootable for operating system function or not bootable. Any standard disk partitioning and formatting utility can be used. Any operating system chosen that is compatible with IDE devices will be acceptable for use with the I35MB. The method of installing a specific operating system can vary, so consult the operating system documentation for instructions.

6 Rev. 003, PN: 610200094