Advanced Global Technology QSP-660 manual Sequencing Format Screens, AdvancedTechnologyVideo,Inc

Sequencing Format Screens AdvancedTechnologyVideo,Inc.

Full Camera Display

Sequence

1: Cameras: 1 2 3 4

Enter Cameras you want displayed in the sequence

Camera: Select

DISPLAY: Accept and Return

Dual PIP Display Sequence

1: Background: As is

2: Insert 1:	1 2 3 4
3: Insert 2:	As is

Enter Cameras you want displayed in the sequence

Camera: Select

DISPLAY: Accept and Return

Quad Display Sequence

1:Upper Left: 1 . . .

2:Upper Right: . 2 . .

3:Lower Left: . . 3 .

4:Lower Right: . . . 4

Enter Cameras you want displayed in the sequence

Camera: Select

DISPLAY: Accept and Return

Split/Squish Display Sequence

1:	Left:	As is
2:	Right:	1 2 3 4

Enter Cameras you want displayed in the sequence

Camera: Select

DISPLAY: Accept and Return

PIP Display Sequence

1:Background: As is

2:Insert: 1 2 3 4

Enter Cameras you want displayed in the sequence

Camera: Select

DISPLAY: Accept and Return

The above screens show the factory default values. The most commonly used sequencing is the full frame or quad formats as shown above. You can customize any or all formats, and may have more than one section of a multi-camera display defined for sequencing. For any particular camera display, cameras are sequenced in ascending numerical order and cameras cannot be repeated. For example, if the pattern “1,3,4,2,1,3” were entered, the software will translate this to “. 2 . 4 “

QSP-660: Instructions for Basic Operation and Installation Page 11