Advanced Global Technology QSP-660 Operation, Display, Freeze, Sequence, Pip, Quadrant, Zoom, Vcr

OPERATION AdvancedTechnologyVideo,Inc.

Your QSP-660 has seven mode control buttons and four numbered camera buttons which allow easy access to all modes of operation. The seven mode buttons on the left are used to control monitor display operations and VCR playback. An LED below each button will light when the unit is in the mode corresponding to that button.

Note: Live camera display modes will affect recording. Following is a summary of each button’s function and the QSP-660 operating modes.

DISPLAY

During live mode, this button selects the quad display. It will also return the unit to the quad display mode from any other (non-quad) display mode. A push and hold of this button for approximately 3 seconds will bring up the QSP-660 set up main menu.

FREEZE

In all display modes a press of this button will freeze the camera image(s) on the monitor display (the output to the VCR recording is also frozen in this case). Another push of this button will deactivate the freeze mode.

SEQUENCE

A button press will activate the camera sequencing for the live mode. Another push of this button will deactivate the sequencing mode. The default camera hold time is 3 seconds.

PIP

When starting in the quad or full screen camera display in live display mode, pressing the PIP (Picture-in- Picture) button will cause the unit to switch to the Single PIP display. Additional presses will cycle the unit through Dual PIP, Split Screen, Squish Screen, Full Frame and back to Single PIP displays.

QUADRANT

This button rotates the orientation of the cameras clockwise on the screen into the desired positions in PIP, Dual PIP, Split Screen, and Squish Screen display modes.

ZOOM

The ZOOM function will expand a quadrant of any image in playback mode. Repeated presses of this button will rotate through the quadrants.

VCR

Pressing this button will switch monitor display from the live camera display mode to the VCR playback mode. The LED indicator will light to show that VCR playback is now possible.

VCR Bypass Function.

The VCR Bypass function is activated by a long button press of the VCR button for approximately 3 seconds. While in VCR Bypass mode, the QSP-660 will pass the VCR output directly to the monitor. A single push of the VCR button will return the unit to normal VCR playback mode and a second push will return the unit to live display mode.

CAMERA Buttons (1 Through 4)

The individual camera buttons 1 through 4 are used to select which camera is to be used for display purposes during live display modes and as zoom in playback. In addition, camera buttons 1 through 4 are also used in the QSP-660 set up menus.

QSP-660: Instructions for Basic Operation and Installation Page 6