Advanced Global Technology QSP-660 manual Set Alarm Enable Schedule, Enable Scheduled Alarms

Alarm Scheduling

The QSP-660 contains a very flexibleAdvancedand advancedTechnologyalarmingVideo,systemInc.designed to provide an optimum solution for any installation. Along with the ability to enable various types of alarm inputs, a built in 7-day timer may also be used to individually enable and disable each alarm. The following menus are used to set the timer and select which alarms the timer will control.

Set Alarm Enable Schedule

Selecting:

1 - 7 Selects one of the days of the week to modify on and off times.

8Copies the on and off times of Monday to all the other weekdays (Tuesday – Friday).

9(Press QUADRANT.) Copies the On and Off times of Saturday to Sunday.

When a day of the week is selected for scheduling (1-7), the display will change to reflect the time you are editing and additional button functions will be displayed. When editing times for a selected day, the FREEZE button will set the alarm system to be On All Day. Similarly, the ZOOM button will set the alarm system to be Off All Day. When editing a time field, camera buttons are used to enter digits 1 through 4 (5-8 are entered as VCR +1-4), the QUADRANT button is used to enter 9, and the PIP button is used to enter 0. The SEQUENCE button will move to the next editable field up through the last editable field where it will accept the line and return the display to the non-edit mode as shown. The DISPLAY button will accept the current entry and move to the next editable field up through the last editable field where it will accept the line and return the display to the non-edit mode as shown.

Set Alarm Enable Schedule

On Time		Off Time
1: Monday	18:00	06:00
2: Tuesday	18:00	06:00
3: Wednesday	18:00	06:00
4: Thursday	18:00	06:00
5: Friday	18:00	06:00
6: Saturday	18:00	06:00
7: Sunday	18:00	06:00

8:Copy Monday to Tuesday – Friday

9:Copy Saturday to Sunday

Camera: Select

5 is VCR + 1

6 is VCR + 2

7 is VCR + 3

8 is VCR + 4

9 is QUADRANT

DISPLAY: Accept and Return

Note: The setting of the hours format in the Set Time/Date menu will determine the hours display in this menu. Also, note that when the system is in 12-hour time mode, the AM/PM field must also be edited. The factory default times for each day of the week are on at 18:00 (6:00PM) and off at 06:00 (6:00AM).

Enable Scheduled Alarms

Selecting:

1 - 4 Toggles the selected camera alarm enable between Normal and Schedule. (The factory default is “Normal”.

When Normal enable mode is selected, camera alarm event types selected through the Alarm Control Options menu (see page 14) and will generate an alarm. Similarly, when Scheduled enable mode is selected, the same camera alarm event will only generate an alarm if the current time and day of the week fall within the On and Off times specified in the Set Alarm Enable Schedule menu (see above). Camera alarm events occurring outside of the On and Off times specified will be ignored when “Schedule” enable mode is selected.

Enable Scheduled Alarms

1:Normal

2:Normal

3:Normal

4:Normal

Camera: Select

DISPLAY: Accept and Return

QSP-660: Instructions for Basic Operation and Installation Page 13