Advantech PCA-6186 Typematic Delay msec, Security Option, Apic Mode, MPS Version Control For OS

3.4.11 Typematic Delay (msec)

Typematic delay is the time interval between the appearance of two con- secutive characters, when holding down a key. The input values for this category are: 250, 500, 750, 1000 (msec).

3.4.12 Security Option

This setting determines whether the system will boot up if the password is denied. Access to Setup is always limited.

System	The system will not boot, and access to Setup will be denied
if the correct password is not entered at the prompt.
Setup	The system will boot, but access to Setup will be denied if
the correct password is not entered at the prompt.
Note:	To disable security, select “PASSWORD SET-
	TING” in the main menu. At this point, you will
	be asked to enter a password. Simply press

<Enter> to disable security. When security is disabled, the system will boot, and you can enter Setup freely.

3.4.13 APIC Mode

This setting allows selecting an OS with greater than 64MB of RAM. Commands are “Non-OS2” or “OS2.”

3.4.14 MPS Version Control For OS

This reports if an FDD is available for Windows 95. The commands are “Yes” or “No.”

PCA-6186 User’s Manual 32