Advantech PCA-6186 user manual PnP/PCI Configurations, PnP OS Installed, Reset Configuration Data

3.8 PnP/PCI Configurations

3.8.1 PnP OS Installed

Select Yes if you are using a plug and play capable operating system. Select No if you need the BIOS to configure non-boot device

Figure 3.9: PnP/PCI configurations screen

3.8.2 Reset Configuration Data

Default is Disable. Select Enable to reset Extended System Configura- tion Data (ESCD) if you have installed a new add-on and system econfig- uration has caused such a conflict that OS cannot boot.

3.8.3 Resources controlled by:

The commands here are “Auto” or “Manual.” Choosing “manual” requires you to choose resources from each following sub-menu. “Auto” automatically configures all of the boot and Plug and Play devices but you must be using Windows 95 or above.

3.8.4PCI/VGA Palette Snoop

This is left at “Disabled.”

41 Chapter3