3.7.10 PowerOn By Modem

When Enabled, an input signal on the serial Ring Indicator (RI) line (in other words, an incoming call on the modem) awakens the system from a soft off state. The choices: Enabled, Disabled.

3.7.11 PowerOn By Alarm

When Enabled, your can set the date and time at which the RTC (real- time clock) alarm awakens the system from Suspend mode. The choices: Enabled, Disabled.

3.7.12 Primary IDE 0 (1) and Secondary IDE 0 (1)

When Enabled, the system will resume from suspend mode if Primary IDE 0 (1) or Secondary IDE 0 (1) is active. The choice: Enabled, Dis- abled.

3.7.13 FDD, COM, LPT PORT

When Enabled, the system will resume from suspend mode if FDD, COM port, or LPT port is active. The choice: Enabled, Disabled.

3.7.14 PCI PIRQ [A-D]#

When Enabled, the system will resume from suspend mode if interrupt occurs. The choice: Enabled, Disabled.

Figure 3.8: Power management setup screen (2)

PCA-6186 User’s Manual

40

Page 52
Image 52
Advantech PCA-6186 user manual PowerOn By Modem, PowerOn By Alarm, Primary IDE 0 1 and Secondary IDE 0, PCI Pirq A-D#