12
POWER MANAGEMENT
The power management divides the power between two cooking zones in a pair (see the illustration). The Power function increases the power to the maximum level for one cooking zone in the pair and decreases the power in the second cooking zone. The display for the reduced zone changes between two levels.
POWER MANAGEMENT FOR THE RIGHT COOKING ZONES AND THE TOP OVEN
The right cooking zones and the top oven use the same energy source (the same electrical phase) when they operate at the same time. The power manage- ment prevents a circuit over- load.
The more power the top oven uses dur- ing its operation, the less is available for the right cooking zones. When a zone cannot use the full power, the dis- play for the zone changes between the two levels.
TIMER
Use it to set an automatic
1.Set the cooking zone. Touch 
again and again until the indicator for the necessary cooking zone comes on.
The indicator of the cooking zone flashes slowly. The timer starts to count down.
4.To see the remaining time, touch
again and again until the indica- tor for the necessary cooking zone flashes quickly. The display shows the remaining time.
When the set time ends, 00 flashes and an acoustic signal sounds. The cooking zone deactivates.
5.Touch 
to stop the signal.
To deactivate the timer before the set time is completed, set the cooking zone with 
and touch
You can use the timer as a Minute Minder when the cooking zones do not operate. To do this, set the cooking zone and activate the timer but do not set the heat setting.
You must set the cooking zone before you activate the timer.
2.Set the heat setting for the cooking zone. You can also set it after you activate the timer.
3.To activate the timer or change the set time, touch + or - on the hob control panel. The maximum time you can set is 99 minutes.
STOP AND GO
The Stop and Go 
function sets all cooking zones that operate to the low- est heat setting ( 
).
This function does not deactivate the timer function.
•To activate this function, touch 
. The display shows the symbol 
.
