Operating instructions
Detergent and conditioner
Which detergent and conditioner?
Use only detergents and conditioners which are suitable for use in washing machines. Always observe the manufacturer’s instructions.
How much detergent and conditioner?
The required quantity depends upon:
•the amount of washing
2If the detergent manufacturer does not include dosing instructions for reduced loads, use one third less for half loads and only half of the full load detergent quantity for very small loads.
•extent of soiling of the washing
•hardness of tap water
Observe instructions for use and dosing provided by the detergent and conditioner manufacturer.
Using Water Softener
In the case of medium to very hard water (from hardness band II) water softener should be used. Observe the manufacturer’s instructions! Then always use detergent dosing for hardness band I (= soft). Information on the hardness of the water in your area is provided by your local water board.
Information on Water Hardness
Hardness Band | Water hardness in °dH | Water hardness in mmol/l | |
(German hardness scale) | (millimol per litre) | ||
| |||
I – soft | 0 – 7 | to 1.3 | |
|
|
| |
II – | 7 – 14 | 1.3 – 2.5 | |
III – hard | 14 – 21 | 2.5 – 3.8 | |
IV – very hard | greater than 21 | greater than 3.8 | |
|
|
|
16
