t
Preset programmes
☞Before programming, check that the clock is set to the correct time.
Example : 12:00
To set:
Proceed as if setting the desired programme for imme- diate use :
select your function and programme length (e.g. con- vection 45 minutes at 200° C).
Instead of START, press the PRESET PROGRAMME button 
. The programme length is automatically added to the clocktime (12:00) and this hour appears in the display, together with the preset programme
symbol 
and the selected function.
With the selector knob, set the hour at which you wish the programme to FINISH, e.g. you would like the dish to be ready at 20:00.
☞Set the time within 10 seconds, or the programme will start up.
Press the START button 
again to validate the time. The preset programme symbol and the clocktime are
displayed.
In order to verify, you may press the PRESET PROGRAMME button to display settings. Press CANCEL to display the clocktime.
To cancel the preset programme, press the CANCEL button for 5 seconds.
iYou may preset all programmes with the exception of defrosting.
A minimum programme length of 1 minute is required.
4 5 : 0 0 |
2 0 0 |
1 2 : 4 5 |
2 0 0 |
2 0 : 0 0 |
2 0 0 |
27
