Caution
yThe flash charging time may increase when the battery is low.
yThe screen is blank when the flash is charging. The next image can be shot only when charging is completed.
yShooting with a flash in a bright environment may cause incorrect exposure.
Using the Selftimer
Use the selftimer to set a delay from the time the shutter button is pressed to the time the image is shot. Use Burst to record continuous still image shooting.
1
2
3
4
Turn the power on, and set the camera to the Capture mode ( | page 13). | |
Open the REC menu ( | page 15). |
|
Change the setting.
Press Mode button to launch the submenu. Press 
or 
to select [Seftimer], then press OK/Enter to confirm the setting.
Disable: Do not use Selftimer.
10 sec.:
The shutter release will delay for 10 seconds.
20 sec.
The shutter release will delay for 20 seconds.
Press the MENU button to close the menu list. Press the shutter button to take a picture.
Tips 
yWhen using the selftimer function, be sure to use a tripod or place the digital camera on a level, stable surface.
yWhen using the selftimer function the selftimer lamp will blink and turn off after the picture is taken.
23
