Overview
| This manual contains operating instructions for the Agilent 8494G/H, |
| 8495G/H, and 8496G/H attenuators. Included in the manual is information |
| required to install and test these attenuators. |
Specification | Instrument specifications are indicated in Specifications, page 6. These |
| specifications are the performance standards or limits against which the |
| instruments may be tested. |
Instruments Covered by | The instruments covered by this manual have a |
Manual | first four digits and letter comprise the serial number prefix. The last five |
| digits form the sequential suffix that is unique to each instrument. The |
| contents of this manual apply to instruments with serial prefixes 2544A and |
| above. |
| An instrument manufactured after the printing of this manual may have a |
| serial prefix that is not listed above. This unlisted serial prefix indicates that |
| the instrument is different from those documented in this manual. |
Description | The 8494G/H, 8495G/H, and 8496G/H are |
| |
| sections connected in cascade. Each section consists of a precision, |
| attenuator card, a lossless |
| slab line transmission lines. The slab lines are flexed by the solenoid |
| plungers to make contact with either the attenuator card or the |
| slab line contacts are gold plated leaf springs which ensure long life and |
| extremely high repeatability. |
8494/95/96G/H Operating And Service Manual 1
