Agilent Technologies 08495-90025 service manual Replaceable Parts, Description Part Number

Replaceable Parts

Replaceable Parts

Table 5 lists the replaceable parts which are the only parts that can be replaced without access to the interior of the instrument. If any parts not listed below need replacement, return the instrument to Agilent Technologies.

To order a part listed in the replaceable parts table below, quote the part number, indicate the quantity required, and address the order to the nearest Agilent Technologies office.

CAUTION	Due to special fixtures necessary for assembly, do not attempt to replace any
	parts not listed in the table below. If the instrument is opened, the warranty is
	void.
Table 5	Replaceable Parts
	Description	Part Number
	Option 003 7-mm center conductor contact	1250-0907
	Option 003 7-mm connector outer shell assembly	1250-0909
	Option 001 type-N female connector outer shell	1250-0914
	Screws for both bases: 4-40 x 7/8 in. Fillister head	2220-0006
	Cable, solenoid drive, 1.52 m (5 ft) long, connector plug on	8120-2178
	one end and other end unterminated
	Base for 8495G/H	5041-3887
	Base for 8494G/H and 8496G/H	5041-3888
	Connector plug and contacts only without cable	TKP12-12-102P-TS-100-AU1
	Contact insertion/extraction tool	TIE-2001

1. Available from distributors of Viking Industries, Inc., Chatsworth CA 91311

8494/95/96G/H Operating And Service Manual 15