Service

4.Close the gap between coupling nut with the nut on the extended-sleeve connector.

To disconnect:

1. Loosen the coupling nut of the connector showing the wider gold band.

CAUTION

Part the connectors carefully to prevent striking the inner conductor contact.

To care for the device:

1.Keep contacting surfaces smooth and clean. Irregularities and foreign particles can degrade electrical performance.

2.Protect the contacting surfaces when the connector is not in use by leaving the coupling sleeve extended.

3.Use lintless material and/or firm-bristles brush such as a tooth brush for cleaning. If a cleaning fluid is needed, use isopropyl alcohol.

8494/95/96G/H Operating And Service Manual 17

Page 23
Image 23
Agilent Technologies 08495-90025 service manual To disconnect, To care for the device