Agilent Technologies 5975 manual Safety and Regulatory Certifications, Information

General Information

Safety and Regulatory Certifications

The 5975 Series MSD conforms to the following safety standards:

•Canadian Standards Association (CSA): CAN/CSA–C22.2 No. 61010–1–04

•CSA/Nationally Recognized Test Laboratory (NRTL): UL 61010–1

•International Electrotechnical Commission (IEC): 61010–1

•EuroNorm (EN): 61010–1

The 5975 Series MSD conforms to the following regulations on Electromagnetic Compatibility (EMC) and Radio Frequency Interference (RFI):

•CISPR 11/EN 55011: Group 1, Class A

•IEC/EN 61326

•AUS/NZ

This ISM device complies with Canadian ICES-001. Cet appareil ISM est conforme a la norme NMB—001 du Canada.

The 5975 Series MSD is designed and manufactured under a quality system registered to ISO 9001.

Information

The Agilent Technologies 5975 Series MSD meets the following IEC (International Electro-technical Commission) classifications: Equipment Class I, Laboratory Equipment, Installation Category II, Pollution Degree 2.

This unit has been designed and tested in accordance with recognized safety standards and is designed for use indoors. If the instrument is used in a manner not specified by the manufacturer, the protection provided by the instrument may be impaired. Whenever the safety protection of the MSD has been compromised, disconnect the unit from all power sources and secure the unit against unintended operation.

Refer servicing to qualified service personnel. Substituting parts or performing any unauthorized modification to the instrument may result in a safety hazard.

Site Preparation Guide 11