Agilent Technologies 5975 manual Electrical Requirements, Voltage ranges of major components

Site Preparation

Electrical Requirements

You are responsible for providing appropriate electrical power and power outlets for all of the components in your 5975 Series MSD system. Power considerations include:

•Voltage ranges of major components

•Power configurations

•Power requirements

•Power plugs and cords

Voltage ranges of major components

	The 5975 Series MSD includes a full-range power supply that can operate
	without reconfiguration on either of two wide ranges of single-phase
	alternating current (AC) electrical power:
	• 120-127 VAC 60 Hz (typical for North America)
	• 200-240 VAC, 50/60 Hz (typical for Europe and Japan)
	The foreline pump also draws its power from the MSD. However, a different
	foreline pump is supplied depending on the voltage range on which the MSD
	will be operating. The pump is supplied according to the standard voltage in
	the country from which the order originates. For example, if an order
	originates from an Agilent Technologies sales office in Germany, the foreline
	pump supplied will be configured to operate on the standard voltage and
	frequency of electrical power in Germany.
	The MSD does not support 100 VAC input power. In countries that have only 100 VAC
N O T E
	power, a step-up transformer must be used to provide the appropriate voltage to the MSD.
	If an instrument is being ordered from one location but is to be installed in another
C A U TI O N
	location with different electrical power characteristics, this must be noted on the order.
	A special note must also be made if the electrical power at the site is different from the
	standard electrical power in that country.

Site Preparation Guide 23