Site Preparation
Site Preparation Guide 17
•Complying with all local laws (codes, ordinances, and regulations) for
mechanical, building, and electrical distribution systems, hazardous waste
disposal, and chemical storage.
Compliance must exist prior to installation.
•Providing lifting equipment adequate to unload the system from the
delivery vehicle and transport it to the site where it will be installed
•Providing someone to help lift the MSD onto the laboratory bench
•Providing adequate secure storage space for the system until it can be
installed by an Agilent Technologies representati ve
Agilent responsibilityAn Agilent Technologies service representati ve will install the MSD and verify
its performance. The service representative’s responsibiliti es are limited to:
•Unpacking the MSD system and verifying that all components a re present
and undamaged
•Connecting the carrier gas line to the instrument from the tank, regulators,
and lines previously installed by the customer
•Installing, connecting, and turning on MSD system components
•Verifying that the system meets Agilent Technologies performanc e
standards
•Providing basic user familiarization for system hardware and software
•Signing the customer up through the Response Centers for instrument and
software support
5975 Series Site Prep.book Page 17 Thursday, January 31, 2008 9:47 AM