Laboratory Supply Requirements | Agilent Technologies 5975 specs

Site Preparation

Laboratory Supply Requirements

Laboratory supply requirements vary with applications.

Cleaning solvents

Cleaning tasks for the MSD require the following HPLC-grade (or better) solvents:

•Methylene chloride

•Isopropyl alcohol

•Methanol

•Acetone

•Water

Proper storage, handling, and disposal of these chemicals is required for personal and environmental safety.

	C A U TI O N	Do not use carbon disulfide as a cleaning solvent on or around the MSD. It is corrosive
	C A U TI O N	and will damage the analyzer. Use of carbon disulfide as a cleaner will void the

		warranty on the analyzer.
		Carbon disulfide may be used as a sample solvent in standard size injections (typically
		2 µL or less).

		Chemical solvents should be considered hazardous and must be handled with care.
	WA R N I N G
	WA R N I N G	Contact your chemical supplier for solvent handling and safety information,

		preferably a material safety data sheet (MSDS).

Data system supplies

You will need paper for printing the results of the testing done during installation and later for printing reports of your analyses. You will also need appropriate supplies for making backup copies of your data files.

Site Preparation Guide

33

Image 33

Agilent Technologies 5975 manual Laboratory Supply Requirements, Cleaning solvents, Data system supplies

Contents

Series Mass Selective Detectors U TI O N WA R N I N G Contents Power Cords General Information Model number Product number Pump type Ionization mode Instrument IdentificationMSD versions Many internal parts of the MSD carry dangerous voltages Important Safety Warnings Many parts are dangerously hot Electrostatic discharge is a threat to MSD electronics When hydrogen gas is supplied to the instrument Hydrogen Safety Chemical Safety Information Safety and Regulatory Certifications Symbols Sound emission declaration Electromagnetic compatibility Recycling the Product Cleaning Site Preparation Customer responsibility Overview Agilent responsibility Compliance must exist prior to installation Analysis Consulting services Other documentation Series MSD Troubleshooting and Maintenance Manual Space and Weight Requirements Series MSD Series GC Computer with monitorALS tray Product dimensions Communications Requirements TelephoneSite LAN network Voltage ranges of major components Electrical Requirements Configuration Measurement Nominal voltage Power configurations Supply Outlets Power consumption Power requirementsProduct Line voltage Required Supply Outlets Power consumption Circuit rating Required Power plugs and cord Other electrical considerations Temperature, humidity, and altitude Temperature Humidity relativeAir Conditioning and Environmental Requirements Exhaust venting Airborne dust Fume exhaust hood Purity Typical pressure range Typical flow, mL/min KPa psi Carrier and Reagent Gas Requirements Regulators, tubing, and fittings Cleaning solvents Laboratory Supply RequirementsData system supplies Spare parts and consumables Part numberMiscellaneous consumables Chemical Consumables Commonly used toolsFerrules 5062-3506 Receiving the System Delivery and unloadingInspecting for damage Unpacking Storage Installation and Verification InstallationVerification Sensitivity specifications Power Cords Power Cords Page Agilent Technologies