2-14
Operating the Instrument
Exercise 6. Making Measurements on the Signal
Positioning the markers
4To position the X1 marker, press:
X1 Position
Set the X1 marker to the left edge of the puls e.
5To position the X2 marker, press:
X2 Position
Set the X2 marker to the right edge of the pulse.
6To position the Y1 marker, press:
Y1 Position
Set the Y1 marker to the bottom of the pulse.
7To position the Y2 marker, press:
Y2 Position
Set the Y2 marker to the top of the pulse.
The display will be similar to Figure2-4.
Figure2-4. Signal custom measurements