Agilent Technologies 85032B/E 50 manual Replaceable Parts for the 85032B Calibration Kit

Replaceable Parts

Introduction

Introduction

Table 6-1lists the replacement part numbers for items included in the 85032B calibration kit and Figure 6-1illustrates each of these items.

Table 6-2lists the replacement part numbers for items included in the 85032E calibration kit and Figure 6-2illustrates each of these items.

Table 6-3lists the replacement part numbers for items recommended or required for successful operation but not included in the calibration kit.

To order a listed part, note the description, the part number, and the quantity desired. Telephone or send your order to Agilent Technologies. See Table 5-1 on page 5-3.

Table 6-1 Replaceable Parts for the 85032B Calibration Kit

Item No.	Description	Qty Per Kit	Agilent Part Number
	Calibration Devices (50Ω Type-N)
1	Male broadband load	1	00909-60009
2	Female broadband load	1	00909-60010
3	Male short	1	85032-60008
4	Female short	1	85032-60009
5	Male open	1	85032-60007
6	Female opena	1	85032-60012
	Adapters (included with Option 100)b
7	Type-N-male to 7-mm	2	85054-60009
8	Type-N-female to 7-mm	2	85054-60001
	Calibration Kit Storage Case
9	Box assembly (includes case and foam pad set)	1	85032-60010
10	Case (without foam pad set)c	1	85032-80002
11	Foam pad setc	1	85032-80003
	Protective End Caps for Connectors
12	Female end cap for type-N	as required	1401-0225
13	Male end cap for type-N and 7 mm	as required	1401-0214
	Miscellaneous Items
15	User’s and service guide	1	85032-90020

a.Includes center conductor extender.

b.Refer to “Options” on page 1-3for description of available options.

c.Included in box assembly.

6-2 85032B/E