Using the Spectrum Analyzer
204
To Demodulate the Product:
These steps are used to help determine which transmitter is causing the
distortion.
12.Position the marker on the desired carrier.
13.Selec t Marker To to Center Freq.
14.Fro m the Controls select Marker.
15.Selec t Main from the Choices field.
16.Decrease the Span to 1.5 MHz (or less).
17.Adjust the Volume and Squelch controls to listen to the demodulated
product.
NOTE: On the TX TEST screen chang e the IF Filter to 230 kHz and/or AF Anl In if
necessary (e.g. to AM for aircraft).