AM Transmitters
120
Measurement Procedure:
1Connect the Antenna to the ANT IN connector.
CAUTION: Do not exceed the connector’s rated input or permanent instrument damage
may result.
On the Test Set:
2Press the PRESET key.
Using the knob and data entry keys:
3Set AF Anl In to AM Demod.
4Select the SPEC ANL screen.
5From the Controls select Ant.
6Set Center Freq and Span fields to view desired spectrum.
7Set Ref Level from −30 dBm to −50 dBm as required to view the desired
signal.
Test Set Options Required Spectrum Analyzer/Tracking Generator (option 102)
Additional Equipment
Required
Whip antenna