Using the Oscilloscope
238
Measurements Using t he Main Control Field s:
•Vert/div selects the vertical amplitude per division.
Units for this field are in Volts, kHz, or percent depending on the AF Anl
In selection.
•Vert Offset moves the displayed signal above or below the center grat icule
line.
•Time/div selects the horizontal sweep time per division.
Indicators:
• Input source is displayed in the lower left corner of the display.
•Marker Time ms changes the units that the marker position is displaye d
in. Displayed value is the time elapsed from th e tri gge r point to the cur-
rent position.
•Marker Lvl V/kHz/% changes the units that the marker position is di s-
played in. Displayed value is the signal level at the current position.