■PERFORMANCE TEST
Test Record
Results of the performance test may be tabulated on the Test Record provided at the end of the test procedure. It is recommended that you fill out the Test Record and refer to it while doing the test. Since the test limits and setup information are printed on the Test Record for easy reference, the record can also be used as an abbreviated test procedure (if you are already familiar with the test procedures). The Test Record can also be used as a permanent record and may be reproduced without written permission from Agilent Technologies.
Test Failure
If the Agilent N3970A fails any performance test, return the instrument to the nearest Agilent Technologies Sales/Service Office for repair (see page 3).
Instrument Specification
Specifications are the performance characteristics of the instrument that is certified. These specifications, listed on page 26, are the performance standards or limits against which the Agilent N3970A can be tested.
Any changes in the specifications due to manufacturing changes, design, or traceability to the National Institute of Standards and Technology (NIST), will be covered in a manual change supplement, or revised manual. Such specifications supersede any that were previously published.
N3970A
31
