Agilent Technologies Serials 2933A-08856 to 08860 3025A-09316 and manual VAC Input Power Option

A

100 VAC Input Power Option 100

General Information

Description

Option 100 is a modification of the power supply that involves changing the values of resistors located in the Overvoltage Protection and Power Limit Circuits. It also entails recalibrating the unit and changing the Front Panel These changes allow the unit to operate at a lower line voltage of 90-105 Vac, while operating on the same line frequency of 48-63 Hz. The reduced input voltage limits the output power, while retaining the standard unit’s output current rating. Other parameters that change due to Option 100 include the Overvoltage Trip Range and the Remote Analog Programming Specification.

Scope of Appendix A

This appendix contains all the information necessary to support the power supply when it is equipped with Option 100. The appendix describes only the changes pertaining to Option 100 and how they affect the other portions of this manual. Unless otherwise specified in Appendix A, all other portions of the manual apply to both the standard supply and Option 100 supply.

Using Appendix A

The Option 100 changes are listed sequentially, starting with Section I in the main body of the manual and working back through Section III. It is recommended that the user mark all the necessary changes directly into the manual using Appendix A as a guide. This will update the manual for Option 100 and eliminate the need for constant referrals back to Appendix A.

Manual Changes

Section I Manual Changes

In Table 1-1, change the following table Specifications.

		Table A-1. Output Boundary Specifications
Agilent	6030A	6031A	6032A	6033A	6035A
Model

6038A

VPl

IP1

VP2

IP2

VP3

IP3

170

4.7

90

10.8

42

17

20

35

12

73

5.2

120

50

16

35

26

13.5

50

17

10

11.1

18

5

30

425

1.38

225

3.20

150

5.0

50

3.7

35

5.7

15

10

100 VAC Input Power Option 100 75