Onkyo TX-DS656 Button, For details, Selecting the digital/analog audio input on, Tuner section

Input source selection and surround setup

1�

�

2�

�

SENDING/		SUBROOM
LEARNED		A B LEARN
POWER	SLEEP DIMMER	TEST	SUR
		TONE	MODE
	SOURCE SELECTOR		MULTI-CH
DVD	VIDEO-1 VIDEO-2	VIDEO-3	INPUT
TAPE-1 TAPE-2 TUNER		PHONO	C D
PROGRAMMABLE AREA TV/ VIDEO
POWER	C H	VOLUME
POWER			TV/ VCR
		TUNER
	GROUP	PRESET
DISC	C D	TAPE
SUBTITLE	DVD
ON / OFF
	PAUSE	CH SEL
	/ STEP
CURSOR
	ENTER	LEVEL	VOLUME
		MUTING
		/ REMOTE
		SPEAKER
REMOTE CONTROLLER		RC-373M

5

TUNER section

4

Using the remote controller

You can use the remote controller to select an input source and set up the surround mode for playback .

1.Press the POWER button.

The STAND-BY indicator on the front panel goes out and the display lights up.

Note:

If the SPEAKER MAIN indicator is not lit on the display, press the SPEAKERS MAIN button on the unit's front panel to make it appear on the display.

2.Select the desired input source using the SOURCE SELECTOR buttons.

SOURCE SELECTOR	Selected input source
button
DVD	DVD player
VIDEO-1	Video Cassette Recorder
VIDEO-2	Video Cassette Recorder, TV
VIDEO-3	Video camera
TAPE-1	MD recorder, DAT deck, cassette tape
	deck
TAPE-2	Cassette tape deck
TUNER	Built-in tuner
PHONO	Turntable

3.Start playing the selected input source.

If you have selected "TUNER" in step 2...

Select the group and preset No. using the GROUP and PRESET a/s buttons in the TUNER area of the remote controller, respectively. For details, see "Tuning in a broadcasting station" on page 32.

Note that you cannot select stations which have not been preset.

4.Adjust the sound volume using the VOLUME y or u button. The current sound volume is shown on the front panel display while adjustment is in progress.

If no sound is output...

Check if "TAPE-2 MONITOR" is shown on the display. If it is lit, the TAPE-2 function is enabled and sound is not output when an input source other than "TAPE-2" is selected. In this case, press the TAPE-2 button to clear the "TAPE-2 MONITOR" display. For details, see "Using the TAPE-2 MONITOR function" on page 44.

5.Press the SUR MODE button repeatedly to select the desired surround mode.

To have stereo sound output, set the Surround Mode item to "STEREO".

The surround mode once set will be recalled automatically every time the same input source is selected. (The previously set surround parameters will also be recalled.) For details, see "Selecting a surround mode" on page 39.

CD CD player

If the selected input source is connected to one of the DIGITAL

INPUT connectors of the TX-DS656...

For details, "Selecting the digital/analog audio input" on page 30.

28