Onkyo TX-DS656 instruction manual Input source selection and surround setup, To select TAPE-2

Input source selection and surround setup

c

*** Menu ***

Input Selector

Rec Selector

Surround Setup

Screen Setup

System Setup

d

** Surround Setup **

Surround

Mode= HALL

Hall Size = LARGE

Effect Level = 1.0

Reverb Level = 1.0

5.Select the input source(s) using the a or s cursor button. The input sources you can select are same as those you can select by using the input selector buttons on the front panel.

Picture/Sound setting	Selected input source
DVD	DVD player
VIDEO-1	Video Cassette Recorder
VIDEO-2	Video Cassette Recorder, TV
VIDEO-3	Video camera
TAPE-1	MD recorder, DAT deck, cassette tape
	deck
TUNER	Built-in tuner
PHONO	Turntable
CD	CD player
MULTI-CH	Multi-channel audio input (Previously
	selected video source for "Picture")

To select "TAPE-2"...

Select "TAPE-2 Moni." using the y or u cursor button and set it to "ON" or "OFF" to enable or disable the TAPE-2 Monitor function. For details, see "Using the TAPE-2 MONITOR function" on page 44.

If the selected input source is connected to one of the DIGITAL

INPUT connectors of the TX-DS656...

Select "Input Mode" using the y or u cursor button and then press the s button to display the Digital Selector screen. For details, "Selecting the digital/analog audio input" on page 30.

6.Start playing the selected input source. If you have selected "TUNER" in step 5...

Select the "Group" and "Preset No." items using the y or u cursor button, then set a correct group and preset number using the a or s cursor button. For details, see "Tuning in a broadcasting station" on page 32. Note that you cannot select stations which have not been preset.

7.Adjust the sound volume using the VOLUME y or u button.

If no sound is output...

Check if "TAPE-2 MONITOR" is shown on the display. If it is lit, the TAPE-2 function is enabled and sound is not output when an input source other than "TAPE-2" is selected. In this case, press the TAPE-2 button to clear the "TAPE-2 MONITOR" display. For details, see "Using the TAPE-2 MONITOR function" on page 44.

8.Select "Surround Mode" using the u cursor button, then set the desired surround mode using the a or s cursor button.

To have stereo sound output...

Set the Surround Mode item to "STEREO". If you have set the System Setup's Subwoofer parameter to YES, you can still specify whether or not you wish to use the subwoofer when Surround mode is STEREO. Set this parameter to YES if you wish to use the subwoofer in STEREO mode. If you have set the System Setup's Subwoofer parameter to NO, this parameter will not appear.

The surround mode once set will be recalled automatically every time the same input source is selected.

"Surround Mode" is not shown if you have selected "MULTI-CH" on the Input Selector screen.

9.Press the ENTER button to set parameters for the selected surround mode.

You are now back to the Menu. (c)

10.Select "Surround Setup" using the y or u cursor button and then press the s cursor button to display the Surround Setup screen. (d)

11.Select the desired surround mode parameter using the y or u cursor button and enter the setting using the a or s cursor button.

For details, see "Changing the surround mode parameters" on page 40.

12.Press the ENTER button twice to clear the on-screen display. Pressing the ENTER button once brings you to the Menu. Pressing it again causes the Menu to disappear.

26