Onkyo TX-DS656 Input source selection and surround setup, Mode= LIVE, Digital Selector, Sound

Input source selection and surround setup

Selecting the digital/analog audio input

You can select the DIGITAL INPUT connector to which the digital audio input source is connected using the on-screen display or the front panel switches. The setting will be recalled automatically every time the same digital audio input source is selected.

Example of digital audio input connector (DIGITAL INPUT) setting

If your input source components have been connected to the three digital audio input connectors as shown below, for example, select the digital audio input connector by the connector number.

Connected input source (Ex.)	DIGITAL INPUT connector used		Setting
DVD player	DIGITAL-1	(OPTICAL)	1
CD player	DIGITAL-2	(COAXIAL)	2
Video disc player	DIGITAL-3	(COAXIAL)	3
Analog input source			ANALOG

Note:

•Before performing the following procedure, carefully check the DIGITAL INPUT connector to which the input source is connected. An improper setting causes no sound or sound output from a wrong input source.

•Pressing the DIGITAL AUDIO SELECTOR button to select a digital audio input channel when no digital audio input source is connected may cause the DOLBY DIGITAL indicator to appear on the display. This occurs when the TX-DS656's built-in microprocessor cannot set the correct surround mode after investigating the connected digital input source and is not a failure.

4

3

MASTER VOLUME

SMART SCAN CONTROLLER

PRESET

SYSTEM

TUNING

SURROUND

ENTER

PARAMETER

STAND-BY

POWER

ON

OFF

SPEAKERS

3-D BASS

MAIN

REMOTE

REC OUT

MULTI SOURCE

Re-EQ

MIDNIGHT

THEATER

MIN

MAX

DIGITAL AUDIO

MULTI CH INPUT

SELECTOR

PTY/ TP

DISPLAY CHARACTER AUTO TUN

SCAN

GROUP

MEMORY FM MUTE/MODE

TREBLE

BASS

CLEAR

PHONES

VIDEO 3/VIDEO CAM INPUT

DVD

VIDEO-1

VIDEO-2

VIDEO-3

TAPE-1

TAPE-2

FM

AM

PHONO

CD

VCR-1

VCR-2 / TV

CAM

M D

MONITOR

S VIDEO

VIDEO

L AUDIO

R(MONO)

AUDIO VIDEO CONTROL RECEIVER TX-DS656

2

1

a

**Input Selector **

Picture = VIDEO-3

Sound = DVD

TAPE-2 Moni. = OFF

Input Mode=Digital-2

Surround

Mode= LIVE

b

*Digital Selector *

Sound = DVD

Analog

Digital-1 OPT

Digital-2 CXL

Digital-3 CXL

Using the front panel

1.Select the digital audio input source using the input selector buttons. The selected digital audio input source is shown on the display.

SPEAKERS MAIN			SURROUND MODE
			STUDIO
V-DVD	DIGITAL	2

REC OUT

Note:

Do not select the FM, AM VIDEO-3 CAM, PHONO, MULTI-CH INPUT or TAPE-2 input source. Otherwise, you cannot perform the following setting.

2.Press the DIGITAL AUDIO SELECTOR button.

The currently selected digital audio input channel is shown.

3.Select the digital audio input channel using the SMART SCAN CONTROLLER.

The digital audio input channel shown on the display changes in the

following sequence:

ANALOG → Digital 1 OPT → Digital 2 CXL → Digital 3 CXL→ (Returns to ANALOG)

4.Press the ENTER button to confirm the setting.

You are taken out of the digital audio setting mode if a button or control other than the ENTER button has been operated or a certain time has elapsed. If so, repeat the entire procedure starting from step 1.

Using the on-screen Menu

In the following procedure, use the remote controller unless otherwise specified.

1.Press the ENTER button.

The Menu appears on the TV screen.

2.Select "Input Selector" using the y or u cursor button, then press the s cursor button.

The Input Selector screen appears. (a)

3.Select "Input Mode" using the y or u cursor button and then press the s cursor button to display the Digital Selector screen. (b)

4.Select the desired digital audio input channel using the y or u button, then press the s cursor button to confirm the setting.

5.Press the ENTER button.

Note:

•If the input source for which you have conducted the above digital audio input setting is not connected to the correct DIGITAL INPUT connector, sound from the input source will not be output.

•If you set a digital audio input mode for an input source which is also connected to the VIDEO-2 input connector, the IPM feature (power interlocking with TV) is automatically disabled.

30