ENGLISH
20.Turn the aerator right side up and assemble the front ends of the hitch arms together using two 5/16" x
21.Assemble the two hitch brackets to the top and bottom of the hitch arms using two 5/16" x 2" hex bolts (B) and 5/16" nylock nuts (G). Do not tighten yet. See figure 13.
22.Assemble the 3/8" hitch pin (J) through the hitch brackets and secure it with a 1/8" hair cotter pin (I). See figure
13.
| (B) 5/16" x 2" | ||
| HEX BOLT | ||
|
| (J) 3/8" HITCH PIN | |
|
| (G) 5/16" NYLOCK NUT | |
(C) 5/16" x |
|
| |
HEX BOLT |
|
| |
(G) 5/16" NYLOCK NUT | (I) 1/8" HAIR | ||
COTTER PIN | |||
|
| ||
FIGURE 13 |
| FRONT VIEW | |
23.Tighten the bolts and nuts assembled in step 20. Tighten the bolts and nuts assembled in step 21. Tighten the bolts and nuts assembled in step 18. Tighten the bolts and nuts assembled in step 3.
Tighten the bolts and nuts assembled in step 17.
24.Assemble a hitch arm mount bracket to the axle bracket using two 5/16" x 1" carriage bolts (E) and 5/16" nylock nuts (G). Do not tighten yet. See figure 14.
| (E) 5/16" x 1" |
| CARRIAGE BOLT |
| (G) 5/16" NYLOCK NUT |
FIGURE 14 | REAR VIEW |
25.Assemble the lift handle through the tray and attach it to the hitch arm mount bracket assembled to the axle bracket. Use a 5/16" x 1" hex bolt (D) and a 5/16" nylock nut (G). Tighten. See figure 15.
26.Position the hitch arm mount bracket so that there is side tension on the lift handle when it is locked in the up position. Tighten the nuts. See figure 15.
27.Assemble the grip (Q) onto the end of the lift handle.
See figure 15.
| (T) GRIP |
| LIFT HANDLE |
| (D) 5/16" x 1" |
| HEX BOLT |
| (G) 5/16" NYLOCK NUT |
FIGURE 15 | REAR VIEW |
