![](/images/new-backgrounds/1197748/19774861x1.webp)
a
b
GH-NS
PC
Enter Program Mode
DISPLAYYOUR OPERATION
WELCOME |
| 1 | 1 | 1 | 1 |
|
| ||||
|
| INITIAL ID CODE |
| ||
1 | 1 | 1 | 1 |
| |
|
| ||||
| INITIAL ID CODE |
|
| ||
ID CODE = | + 4 digit |
|
|
|
|
Select Menu & Quit |
|
|
|
|
|
DISPLAY |
| YOUR OPERATION |
Programming (GH-NS)
a. Programming with a PC
•You can use a PC to enter data and write in or change resident names.
•Use the connection cable that comes with
•In your PC, install the setup tool program from the CD that comes with the
∗For information on how to use the setup tool, see the text (.txt) file that is installed in the same folder as the setup tool (.exe). Save programmed data and resident information data to your PC is recommended.
b. Programming with
•Confirm that "Welcome" is shown on the Display, indicating that the system is in standby mode.
∗You can change the "Welcome" text.
• First, set the system to program mode. (For details, see above.) |
∗ Before you begin programming, we recommend that you |
register a new exclusive ID code for yourself so that the |
system is not accessed by others. (For details, see |
If you have forgotten your ID code, set the switch (#1) to ON |
for approximately 2 seconds. The ID code will be reset to the |
default setting of "∗1111". |
SELECT LANGUAGE
MENU
1SELECT LANGUAGE
2CHANGE ID CODE
3ACCESS CODE
4RESIDENT INFO
5SET TIMER
6CHANGE GREETING
7TRANSFER DATA
8SCROLL SPEED
9QUIT
BACKWARD FORWARD
Scroll
Go to Menu 1-8
DECIDE & NEXT
Standby |
DECIDE & BACK
NOTE: To display only resident name without room number; Set the switch (#2) to ON.
ON
1 2 3
4
ON
1
ON
2
- 31 -