Aiphone 0207 AIC operation manual 11-2 11-5, 11-3 211-6, 11-4

11-2 11-5

12

1

4 G H

7 QR

2 A B

5 J K

8 T U

0

3 D E

6 M N

9 XY

Calling from the Doorbell (at Individual Door)

1.The doorbell button is pushed. A call tone sounds as long as the button is held down.

2.A different call tone sounds (there is no communication available).

Calling the Security Guard Station

Press the light/security guard station call button on the residential station. You will hear a low-volume call tone. When the system is being used for communication, an in-use tone will be heard at the residential station. (The call is only invalid when a communication link has not been established.)

11-3

1

211-6

1	2
	DOCTOR

Door Release
1.	Press the door release button while in communication.
2.	The door release function will activate on the entrance station
∗	that is in communication.	3	4
	Depending on the electric door release system that you use, the
	door release may be active only while the door release button is
	pressed.

11-4

1 2

Turning on the Entrance Light

1.Press the light button once while in communication.

2.The outside light of the entrance will turn on for the preset duration of time. (4 -5)

Automatic Entry (Doctor Call) Option

1.A visitor presses the call button that has been assigned for automatic entry.

2.The door is unlocked instantly.

3.The residential station for which the automatic entry function is set is called. Press the talk button as necessary to respond.

4.Switching the automatic entry function on and off

•Press the light button while holding down the talk button of the residential station for which this function is set to switch the function on and off. When the function is on, the Call tone off LED on GH-1KD & GH-1AD and TALK LED on GH-1MD will flash at 2.5 second intervals in standby.

- 40 -