Aiphone AC-10F Names, Mounting, JF-DVunit, Installation, Français English, Deutsch, Español

NAMES

Français English

12

	4
1	2
3	3
	4
4

1LED indicator (Orange)

2 LED indicator (Green)

3 Keys (Yellow)

4 Special screws for panel mounting

Deutsch

MOUNTING

Español

AC-10S

1.Drill holes in the wall to match the size and number of screws.

2.Attach the mounting bracket to the wall using the mounting screws.

3.Attach the unit to the mounting bracket using the special screwdriver and the special screw for mounting.

AC-10F

1.Detach the AC-10F panel using the special screwdriver supplied.

2.Attach the flush mount back box to the wall.

3.Attach the panel to the flush mount back box using the special screwdriver and the special screws for panel mounting.

Nederlands

AC-10S

Cable

Spare screw holes

55mm (2-3/16")

1

Wall

3

Click

AC-10F	85mm (3-3/8")
	100mm
	(3-15/16")
	45mm
	(1-12/16")

2

Flush mount back box

When this unit is to be used with the JF-DV, please refer to the illustration below when installing it.

Please also refer to "TEMPLATE FOR AC-10S MOUNTING BRACKET(SCALE 1:1)"(page 42).

1. JF-DV unit	2. Positions for drilling holes
	Please refer to the
	illustration below when
	drilling the holes. Make

3. Position of mounting bracket	4. Installation
Refer to the illustration	Attach the unit to the mounting bracket
below when attaching the	by pushing it into the bracket. Tighten
mounting bracket.	the screws to complete the installation.

sure the cable inlet is within

the shaded area shown in

the illustration below.

98mm (3-7/8")

() As there are drain holes at the bottom of the JF-DV unit, do not block the space between the JF-DV and the access control keypad.

173mm (6-13/16")
98mm (3-7/8")	42.5mm	2/3")-(1

55mm (23/16")-

49mm	49mm
(1-15/16")	(1-15/16")

	(7/16")
3.5mm	11.5mm
(1/8")

49mm (1-15/16")

15mm(9/16")	55mm
	64mm (2-1/2")

42.5mm -(1 2/3")

(2-3/16")

68.5mm (2-11/16")

5mm (3/16")

(※)

3

A hole for cable inlet

「Cable inlet」