Aiphone AC-10S, AC-10F Setting the code length, Setting the master code, Default 4 digits, group

The result of each operation is indicated by the

Orange (L)	Green (R)
	lighting up of the LED indicators on the upper section
	of the unit, and by the sounding of the buzzer.

	(orange)	(green)
Input the master code twice.	Illumination Blinking
(Default:	)	Bleep, Bleep

Setting the code length	Setting the master code		Setting the code
(Default: 4 digits)	(Default 1234)	group 1	group 2

English Français Deutsch

Input the setting code.

Illumination Blinking

Bleep

Input the setting code.

Illumination Blinking

Bleep

00 - 59

Inputting of user number (ex.: 01)

	When a user code
	that has already
	been set is selected
	Blinks
Illumination Blinking Illumination twice
Bleep	Bleep,
	Bleep

60 - 99

Inputting of user number (ex.: 60)

	When a user code
	that has already
	been set is selected
	Blinks
Illumination Blinking Illumination twice
Bleep	Bleep,
	Bleep

Español Nederlands

Inputting of code length (ex.: 5 digits)	Inputting of new master code	Inputting of code (ex.: 1006)	Inputting of code (ex.: 04B2)
4, 5, or 6 digits	(ex.: 4321)	* Numbers 0 - 9 and the	* Numbers 0 - 9 and the
		letters A and B can be used	letters A and B can be used
Illumination Blinking	Illumination Blinking	Illumination Blinking	Illumination Blinking
Beep	Beep
		Beep	Beep

- When the		key is pressed, the green LED lights up, the buzzer beeps twice, and the system exits the setting mode.	Indicator	Blinking
			goes out
(If the	key is included in the user code and the master code, the system does not exit the setting mode.)
					Bleep,
- You can continue the setting up operation by entering an arbitrary setting code.					Bleep

·The set code will be saved in memory, even if the code length is changed. However, codes of different lengths cannot be used.

·When the code length has been changed, the master code returns to the default value (if the number of digits in the code is 4, 5, or 6, the master code is 1234, 12345, or 123456 respectively).

·Please note that the shift to the setting mode can be performed

during timer-linked unlocking.

However, if " " is included in the master code, the door will

be unlocked, and the shift to the setting mode will not be able to be performed.

·The same code cannot be set for both the user code and the master code (the previously set code has priority).

·Do not set simple codes, such as 1111.

·We recommend that you change the default master code.

·To make the set user code invalid, press 0000 (when 4 digits are used), 00000 (when 5 digits are used), or 000000 (when 6 digits are used). Code numbers which contain only "0" cannot be set as user codes.

·As the factory pre-setting master code is 1234, 1234 (when 4 digits are used), 12345 (when 5 digits are used), and 123456 (when 6 digits are used) cannot be set as user codes.

·Do not set simple codes, such as 1111.

*The same code cannot be set for both the user code and the master code. The previously set code has priority.

6