Troubleshooting
Question | Answer |
|
|
|
|
When using the camera |
|
|
|
| |
The camera has no power. | The batteries may be out of power, | |
| please change the batteries. | |
| Make sure that the battery is installed | |
| correctly. |
|
|
| |
Cannot power on my camera | Make sure that the battery is installed | |
correctly. |
| |
even though batteries is |
| |
|
| |
installed. | If it is idle over 3 minutes, the camera | |
| will shut down automatically, please | |
| press the Power button or slide the Lens | |
| cover to power on the camera. | |
|
| |
Cannot take pictures and | Make sure that the Lens cover is open. | |
|
| |
movies when pressing the | The storage is full. Please free some | |
Shutter button. | space of the SD/MMC card or flash | |
| memory. |
|
| Check if the camera is under the status | |
| of charging batteries. | |
| Check if the SD/MMC card is set to | |
| "protected". |
|
| If the "MEMORY ERROR" message | |
| shows on the LCD display, please set the | |
| Mode switch to | mode format the |
| card. |
|
|
| |
I did not delete the picture | Check if your files are stored in the | |
and movie, but cannot find | camera's | |
the data in the SD/MMC card. | icon at the right bottom section on the | |
| LCD display, it means you are using the | |
| camera with a SD/MMC card. Please | |
| remove the card to find the data in the | |
| flash memory. (For details, see the | |
| "Removing the card" section on page 6) | |
|
| |
Cannot set the strobe to the | Charging the flash strobe requires more | |
"On" mode. | power of batteries. When the battery is | |
| under the status of low power, the strobe | |
| On cannot be set. Please change the | |
| batteries. |
|
|
|
|
