Motion detection region settings can be found at the bottom of this page:
The descriptions of every setting in motion detection menu will be given below:
Item | Description |
Region1 / | Check the box to enable / disable a certain motion detection |
Region2 / | area. |
Region3 |
|
|
|
Sensitivity | Control the detection sensitivity of motion detection of |
| respective motion detection region. When sensitivity is higher, |
| small changes in image will cause IP camera to send a Email / |
| FTP notification; if you received too much unwanted |
| notification, try to set sensitivity to a lower value. |
|
|
Refresh | Click this button to take and display a new picture so you can |
| make |
|
|
Save | Save current motion detection settings. |
