| If the key length is |
| or 5 ASCII characters, like 112233aabb (HEX) or MYWEP |
| (ASCII). |
| If the key length is |
| or 13 ASCII characters, like 11223344556677889900abcdef |
| (HEX) or myweppassword (ASCII). |
|
|
WEP Key Format | Select the Key Format of WEP key here. Available options are |
| ‘HEX’ and ‘ASCII’. |
| When you select ‘HEX’ WEP key format, you can only use |
| numbers (0 to 9), and alphabet a to f as WEP key; when you |
| select ‘ASCII’ WEP key format, you can use all alphanumerical |
| characters, and is case sensitive. |
|
|
Default Key | Select the default key set that the IP camera should use |
| against the wireless access point when WEP encryption is |
| used. |
| Available options are 1 to 4. |
|
|
WEP Key 1 | Input the 1st set of WEP key here. At least a set of WEP key is |
| required if you use WEP as Authentication. |
| You should enter the key value into WEP Key 1 if you only have |
| one key. |
|
|
WEP Key 2 | Input the 2nd set of WEP key here. |
WEP Key 3 | Input the 3rd set of WEP key here. |
WEP Key 4 | Input the 4th set of WEP key here. |
Click ‘Apply’ to save settings and make the new settings take effect.
