| ‘Camera Search’ box. |
|
|
Select | Select a camera listed in ‘Camera Search’ box, and click |
| ‘Select’ button to fill all parameters of selected camera in every |
| camera configuration fields. |
|
|
Refresh | Rescan all cameras on your local network. If you didn’t see the |
| camera you expected in ‘Camera Search’ box, or new cameras |
| has been joined to your local network after last scan. |
|
|
Name* | Input the name of camera here. Default value is the first 6 bytes |
| of camera’s MAC address, you can change the name of |
| camera so you can remember the camera’s location of purpose |
| easily. |
|
|
Model | Displays the model of selected camera, this field can not be |
| changed. |
|
|
IP* | Input the IP address of camera. |
|
|
Username* | Input the user name of camera. |
|
|
Web Port* | Input the web port of the camera. By default it’s ‘80’. |
|
|
Password | Input the password of camera. Default value is ‘1234’. You |
| should change the password if you changed the password of |
| selected camera. |
Video Format | Select the video encoding format of this camera (MJPEG or |
| MPEG4). |
|
|
Reset | Clear all fields in ‘Camera Configuration’ section. |
|
|
OK | Save settings in this tab. |
|
|
Cancel | Discard all settings in this tab. |
|
|
* It’s recommended to use ‘Select’ button to fill the content of this field.
After you’ve set all channels you wish to set, click ‘OK’ to save settings, and if everything’s correct, you’ll see the camera’s image in ConnectSky™ Viewer’s main menu:
