SMTP Server | Input the IP address or host name of the SMTP server (the |
| server that delivers the Email for you) here. |
| If you don’t know, please refer to the SMTP server you’re using |
| in your Email software (i.e. Microsoft Outlook), or ask your |
| network administrator or ISP. |
|
|
SMTP Port | Input mail server’s SMTP port here. Most of mail servers use |
| port number 25. |
|
|
Sender | Input the Email address of mail sender, this will help you to |
Address | identify the Email sent by this IP camera by sender’s Email |
| address. |
| NOTE: Some mail server would reject to deliver the Email from |
| unknown sender, it’s recommended to input your own Email |
| address here, or any other actual one. |
|
|
SMTP | Some SMTP server requires mail senders to be authenticated |
Authentication | before they can send Email. If your SMTP server requires you |
| to do so, please select ‘Enable’, or select ‘Disable’ to disable it. |
| If you don’t know, please refer to the SMTP server you’re using |
| in your Email software (i.e. Microsoft Outlook), or ask your |
| network administrator or ISP. |
|
|
User Name | Please input the user name of SMTP server here, if your SMTP |
| server requires the use of authentication. |
|
|
Password | Please input the password of SMTP server here, if your SMTP |
| server requires the use of authentication. |
|
|
Click ‘Apply’ to save settings and make the new settings take effect.
After that, you can click ‘Send a test email’ to send a testing Email to the address you set here, so you can make sure the setting you specified here is correct and working.
2.5.2 FTP Settings
These settings are used to send the captured picture by FTP:
