NTP Server | Please input the IP address or host name of NTP server here. |
| You can use default value ‘pool.ntp.org’, or ask your ISP for the |
| IP address or host name, if they have one. |
|
|
Enable Daylight | Select ‘Yes’ if your area of residence uses daylight saving; if |
Saving Time | not, select ‘No’. |
|
|
Synchronize to | Click this button and the IP camera will use the current time |
PC time | setting of your computer as IP camera’s time setting. |
|
|
Click ‘Apply’ to save settings and make the new settings take effect.
2.8.3 Utilities
This menu allows you to upgrade firmware, clear all settings, reboot the IP camera, and switch LED lights on/off.
The descriptions of every setting in this menu will be given below:
Item | Description |
Upgrade | If you downloaded latest firmware file from our website, you |
Firmware | can click ‘Browse’ button to pick the firmware file you wish to |
| use. Then click ‘Upgrade’ button to start firmware upgrade |
| procedure. |
| It’s recommended to use wired Ethernet connection when you |
| use this function, and DO NOT DISCONNECT OR CLOSE |
| WEB BROWSER DURING UPGRADE! |
|
|
Reset to Factory | Clear all settings in the camera. Please think again before you |
Defaults | do this, and then click this button to reset all settings. |
| NOTE: IP address will be reset to default value ‘192.168.2.240’ |
|
|
