Airlink101 AIC600W user manual Motion Detection, Basic Settings

2.6 Motion Detection

2.6.1 Basic Settings

Motion detection function makes this IP camera become your non-stop guard. You don’t have to waste time monitoring the images from the camera, yet it will detect all motions for you. Once motion is detected, a captured image will be sent to you by Email or via FTP.

You can access this menu by clicking ‘Motion Detection’ on the top of web management interface.

The descriptions of every setting in this menu will be given below:

Item	Description
Motion Detection	Select ‘Enable’ to start motion detection, and select ‘Disable’ to
Enable	disabled it.
Next Event	Specify the time interval between two motion detections in
Detected Interval	seconds. If a motion is detected after last detection time, and
	before next detection time, nothing will be send by Email or via
	FTP.
	Please specify a time interval that suites your need. If the time
	interval is too long, you may not be able to know what is
	happened between time interval; if the time interval is too short,
	you may receive too many unnecessary images or it may
	consume too much storage spaces on Email and / or FTP