Press ENTER.
Press TUNER MEMORY.
Press ENTER.

5 Press TUNER MEMORY.

The preset number flashes. Perform steps 6 and 7 while the preset number flashes.

Other operations

To

Do this

Tune in a station

Follow the procedure described

with a weak signal

in “Manual tuning preset”

 

(page 14).

 

 

Set another station

Start over from step 2. After

to the existing

step 5, press . or >

preset number

repeatedly to select the preset

 

number you want to store the

 

station.

 

 

Preset number

6 Press . or > repeatedly to select the desired preset number.

7

8 Repeat steps 2 through 7 to preset other stations.

Tip

Press x to stop scanning.

Manual tuning preset

You can manually tune in and store the radio frequency of the desired stations.

1 Press TUNER BAND (or FUNCTION repeatedly) to switch the function to tuner.

2 Press TUNER BAND repeatedly to select “FM” or “AM”.

3 Press TUNING MODE repeatedly until “AUTO” and “PRESET” disappear from the display.

4 Press TUNING + or – repeatedly to tune in the desired station.

5

6 Press . or > repeatedly to select the desired preset number.

7

8 Repeat steps 2 through 7 to preset other stations.

To improve tuner reception

When tuner reception is poor, set CD player power off by CD power manage function. CD power is factory set to on.

1Press CD (or FUNCTION repeatedly).

2Press ?/1 to turn off the system.

3After “STANDBY” stops flashing, press and hold x then ?/1 on the unit.

“CD POWER OFF” appears.

To set CD power on

Repeat the procedures above and “CD POWER ON” appears.

Notes

•When “CD POWER OFF” is selected, disc access time is increased.

•You cannot change the setting in Power Saving Mode (page 20).

14GB