Timer
Falling asleep to music
— Sleep Timer
You can set the system to turn off after a certain time, so that you can fall asleep to music.
Press SLEEP.
Each time you press the button, the minute display (the
AUTO* t 90min t 80min t … t 10min
tOFF
*The system automatically turns off in 100 minutes or after the current CD finishes playing.
Other operations
To | Do this |
Check the | Press SLEEP once. |
remaining time* |
|
|
|
Change the time | Press SLEEP repeatedly to select |
to turn off | the time you want. |
|
|
Cancel the Sleep | Press SLEEP repeatedly until |
Timer function | “OFF” appears. |
|
|
*You cannot check the remaining time if you select “AUTO”.
Tip
You can use the Sleep Timer, even if you have not set the clock.
18GB
Waking up to music
— Play Timer
You can wake up to music at a preset time. Make sure you have set the clock (see “Setting the clock” on page 9).
Use buttons on the remote for the operation.
1 Prepare the sound source you want to play.
•CD: Load a disc. To start from a specific track, make a program (see “Creating your own program” on page 12).
•Tuner: Tune in the preset radio station (see “Listening to the radio” on page 15).
2 Press VOLUME + or – to adjust the volume.
3 Press CLOCK/TIMER SET.
4 Press . or > repeatedly until “TIMER SET?” appears, then press
ENTER.
“ON TIME” appears and the hour indication flashes.
5 Set the time to start playing.
Press . or > repeatedly to set the hour, then press ENTER.
The minute indication flashes.
Press . or > repeatedly to set the minute, then press ENTER.
6 Set the time to stop playing following the same procedure as step 5.
7 Press . or > repeatedly until the desired sound source appears.
Each time you press the button, the display changes as follows:
TUNER y CD PLAY
8 Press ENTER.
“PLAY TIMER”, the start time, the stop time and the sound source appear in turn, then the original display returns.