For Mac OS 9.0 to 9.2

To install the USB driver

1Connect the system to the computer with the supplied USB cable (see page 22).

2Start up the computer.

3Press ?/1 to turn on the system.

4Press PC (or FUNCTION repeatedly) to switch the function to PC.

For Mac OS X 10.1 to 10.3

To install the USB driver

1Connect the system to the computer with the supplied USB cable (see page 22).

2Start up the computer.

3Press ?/1 to turn on the system.

4Press PC (or FUNCTION repeatedly) to switch the function to PC.

5Select [System Preferences...] in the Apple menu.

6Click the [Sound] icon in the [Hardware] menu.

7Click the [Output] tab, then click to select [ZP Hi-Fi Component System] or [USB Audio DAC] in the [Choose a device for sound output] window.

Listening to audio files on a personal computer

1 Connect the system to the computer with the supplied USB cable (see page 22).2 Start up the computer.

Wait for the OS to start up properly.

3 Press ?/1 to turn on the system.4 Press PC (or FUNCTION repeatedly) to switch the function to PC.5 Perform the operations on the computer side to start playback.

6 Press VOLUME + or – (or turn VOLUME control on the unit) to adjust the volume.

Notes

•To adjust the volume, operate the computer and system volume control together. Even if you adjust the volume on the computer side, the system volume cannot be adjusted.

•When playing back music through the USB port, do not turn off the system. This may cause the computer to malfunction.

•Before disconnecting the USB cable (supplied), be sure to first quit the software.

•The sound may skip or there may be noise depending on the computer environment.

•Also see the operation manuals supplied with the computer and the music playback software.

26GB